HELP AND TROUBLESHOOTING FOR YOUR ZGEMMA

We recommend using WOOSHBUILD and to download basebuild please click   HERE

To update the ALL4ONE version press menu/plugins/Add iptv (note the user/password) then make sure it says running latest version, if not press 5 to install, you may need to do this a couple of times, if says execution finished press ok then validate and return to main screen press fav to see bouquets


TO ADD AND REMOVE/UDATE PLUGINS

If you want to remove the ALL4ONE adder  plugin or xtreamtv-ipyv-mips-boxes plugin press menu/plugins/red button (to remove) extentions now scroll to the plugin and select (ok) to remove, then exit back to plugin browser

To add either plugin (this should update to the latest versions) press menu/plugins/green button (download plugins) extentions, scroll to plugin you require and select, when done go back to main menu and press menu/plugins and run the one you want. (mips boxes is the one required)

CREATE A BACKP OF YOUR IMAGE


IT IS STRONGLY ADVISED THAT YOU CREATE AN IMAGE/BACKUP OF YOUR BOX BEFORE CHANGING ANY SETTINGS......TO DO THIS PLEASE.....
Press blue on your remote, scroll right then down to complete backup/ok/red for HDD then wait until the process has finished, this may take 10 mins or so, please be patient

To Restore a Backup

Press blue button/flash online/local/yellow for local/yellow for devices/select your device/then full backup_zgemma then select the folder with the numbers  and press green for flash, it should now restore

How to install a new USB or HDD


Put your new device n a computer and format it in FAT32 if possible,
place it in the rear usb slot on your box
press the blue button on your remote, then scroll down to HARDDISK, then accross to initiallisation,ok and agree to the device being formatted (red button)
When this is done scroll left to mounts and then over to device manager, in you will see your divice, it needs to show MOUNT/MEDIA/HDD if not press green button to setup mounts and change the mount to show /media/HDD and press green to save, system will now ask to restart.
after the restart please press the red button then plugins and swap manager and green button to create/select your device/512mb/ok  and wait, when box shows media/hdd/swapfile press yellow for auto start then red to activate
finally exit out to main screen and press pause on your remote, live tv should pause, if so your new device is up and running. You now need to download EPG

How to install a new line, ccam.cfg, newcamd.list or CWS...... via remote

You can also Locate your line this way

Press menu/plugins/dream explorer/usr/keys, if your line starts C: or N:then it will go in the  ccam.cfg. if it starts with CWS then it will go in newcamd.list you will see a code in here, this is your line, highlight it and press ok, it can now be edited using your remote like an old phone keypad, after you have done place the curser at the end of your line and press ok then exit, it will ask if you are sure? if so press ok (please make sure you have a copy of the original line as mistakes in this process can lead to loss of all service)

How to install a new line via FTP or OPK via Filezilla

First you will need to download an ftp client pragram, i use filezilla, its free and easy enough to use
Once you have and are ready you need to find the ip address of your box, menu/information/network in here you will have an ip address, you need to put this into ftp (filezilla) click host user name is root and password is root, when you are connected to your box tou will see folders on the right hand of your screen, these are the folders in your box, press the + sign to drop the folders down, scroll down to USR and double click it, now scroll down to KEYS and click once, you will now see the ccam.cfg/mg_cfg and newcamd.list files underneath, these are ware you need to edit your line in by right click on the line type (c line = ccam.cfg n line= newcamd.list cws= newcand.list) and view/edit you can now edit or paste in your new line, exit out (you will more than likely need to restart your cams after this process)

How to restart the cams

Press the red button on your remote, select softcampanel, on select Cam1 scroll right untill you see Ccam 2,3,0 (if your line is a c line or n line, if your line starts CWS then scroll to mgcmd_1.38r....(we usually use CWS line if you have a vm line) when the correct cam is showing press green for start.

Note; if your box has already been running then the cam already showing will most likely to be the one you need to restart


EPG IMPORTER DOWNLOAD

To manually download the channel listings (EPG) press menu/plugins/epg importer blue button for sourses and make sure all boxes for sky uk/virgin uk rytec are all ticked if using sky or virgin for iptv make sure all QLUK boxes are ticked/yellow for manual agree to start, (Please note you need to have a usb or hdd installed correctly for the epg as it is stored there)

TO CHANGE YOUR NET AREA CODE

If you have not supplied us with your area code then we will install the nearest one, if your area scan fails it may need to be changed (scan fail can also be down to no satellite cable installed if you have requested satellite) to change please follow this

GOOGLE VIRGIN AREA NET ID CODES and see which you are near

menu/setup/service searching/tuner configuration/tuner B and C if you have/network id--change to yours/exit

now

menu/setup/service searching/autobouquetsmaker/providers/virgin UK area--change to yours/exit

START SCAN....this may need to be repeated until you have the correct one

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

INSTALL WIFI DONGLE

Plug dongle in USB Slot in the front of your Zgemma (It’s hidden behind the
panel on the right hand side) - You do not need to install any drivers.

• Reboot your Zgemma - This is needed so the built in drivers can start up during boot
• Menu Button > Setup > System > Network > Device Setup
• Select WLAN connection
• Network Wizard
• List Available Networks
• Choose your Network
• Change ‘Use Interface’ to YES
• Change encryption to suit your wireless network (Usually ‘WPA or WPA2’)
• Enter your Wi-Fi password in the encryption key and press OK
• When prompted, select YES to activate the network and yes to disabling the
2
nd network interface (This will be your wired connection)
• When the network has been activated you will see a message of confirmation.
• Press OK
If you find that your wireless network is not working, ensure that you’ve entered the
correct password for your wireless network - If you get the password wrong, the
device will still connect. But it won’t be able to send and receive traffic wirelessly.

CHANGE YOUR TV REGION for satellite

To change the tv region on your box so you recieve the correct programs press menu/setup/service searching/autobouquetsmaker/providers scroll to sky uk then change the area to your correct one making sure it is on sd or custom NOT HD press green to save and then press start scan. When it is finished press exit to main screen, now press FAV and choose entertainment and your local area should be showing.

TO UPDATE WOOSHBUILD TO LATEST RELEASE

PLEASE MAKE SURE YOU HAVE A COPY OF ALL YOUR SUBSCRIPTIONS/GIFTS/ USERNAMES AND PASSWORDS, AS WELL AS YOUR AREA NET ID!!!!!!!! We are not responsible for this information neither if the update fails and puts the box into boot mode..

We can provide a recovery service for £30 returned providing you have all the info above

Ok so to start the update press the portal button on your remote or menu/plugins WB config

Now press backup/restore and run backup settings and then backup line (you can also view your line ect to make sure you have it-see other help on here)

Now press reflash/update Wooshbuild and follow the instructions from there.

when the update is complete you then go back to wb config and restore your line-and settings, all should be good
HELP AND TROUBLESHOOTING FOR YOUR ZGEMMA

We recommend using WOOSHBUILD and to download basebuild please click   HERE

To update the ALL4ONE version press menu/plugins/Add iptv (note the user/password) then make sure it says running latest version, if not press 5 to install, you may need to do this a couple of times, if says execution finished press ok then validate and return to main screen press fav to see bouquets


TO ADD AND REMOVE/UDATE PLUGINS

If you want to remove the ALL4ONE  plugin or xtreamtv-ipyv-mips-boxes plugin press menu/plugins/red button (to remove) extentions now scroll to the plugin and select (ok) to remove, then exit back to plugin browser

To add either plugin (this should update to the latest versions) press menu/plugins/green button (download plugins) extentions, scroll to plugin you require and select, when done go back to main menu and press menu/plugins and run the one you want. (mips boxes is the one required)

CREATE A BACKP OF YOUR IMAGE


IT IS STRONGLY ADVISED THAT YOU CREATE AN IMAGE/BACKUP OF YOUR BOX BEFORE CHANGING ANY SETTINGS......TO DO THIS PLEASE.....
Press blue on your remote, scroll right then down to complete backup/ok/red for HDD then wait until the process has finished, this may take 10 mins or so, please be patient

To Restore a Backup

Press blue button/flash online/local/yellow for local/yellow for devices/select your device/then full backup_zgemma then select the folder with the numbers  and press green for flash, it should now restore

How to install a new USB or HDD


Put your new device n a computer and format it in FAT32 if possible,
place it in the rear usb slot on your box
press the blue button on your remote, then scroll down to HARDDISK, then accross to initiallisation,ok and agree to the device being formatted (red button)
When this is done scroll left to mounts and then over to device manager, in you will see your divice, it needs to show MOUNT/MEDIA/HDD if not press green button to setup mounts and change the mount to show /media/HDD and press green to save, system will now ask to restart.
after the restart please press the red button then plugins and swap manager and green button to create/select your device/512mb/ok  and wait, when box shows media/hdd/swapfile press yellow for auto start then red to activate
finally exit out to main screen and press pause on your remote, live tv should pause, if so your new device is up and running. You now need to download EPG

How to install a new line, ccam.cfg, newcamd.list or CWS...... via remote

You can also Locate your line this way

Press menu/plugins/dream explorer/usr/keys, if your line starts C: or N:then it will go in the  ccam.cfg. if it starts with CWS then it will go in newcamd.list you will see a code in here, this is your line, highlight it and press ok, it can now be edited using your remote like an old phone keypad, after you have done place the curser at the end of your line and press ok then exit, it will ask if you are sure? if so press ok (please make sure you have a copy of the original line as mistakes in this process can lead to loss of all service)

How to install a new line via FTP or OPK via Filezilla

First you will need to download an ftp client pragram, i use filezilla, its free and easy enough to use
Once you have and are ready you need to find the ip address of your box, menu/information/network in here you will have an ip address, you need to put this into ftp (filezilla) click host user name is root and password is root, when you are connected to your box tou will see folders on the right hand of your screen, these are the folders in your box, press the + sign to drop the folders down, scroll down to USR and double click it, now scroll down to KEYS and click once, you will now see the ccam.cfg/mg_cfg and newcamd.list files underneath, these are ware you need to edit your line in by right click on the line type (c line = ccam.cfg n line= newcamd.list cws= newcand.list) and view/edit you can now edit or paste in your new line, exit out (you will more than likely need to restart your cams after this process)

How to restart the cams

Press the red button on your remote, select softcampanel, on select Cam1 scroll right untill you see Ccam 2,3,0 (if your line is a c line or n line, if your line starts CWS then scroll to mgcmd_1.38r....(we usually use CWS line if you have a vm line) when the correct cam is showing press green for start.

Note; if your box has already been running then the cam already showing will most likely to be the one you need to restart


EPG IMPORTER DOWNLOAD

To manually download the channel listings (EPG) press menu/plugins/epg importer blue button for sourses and make sure all boxes for sky uk/virgin uk rytec are all ticked if using sky or virgin for iptv make sure all QLUK boxes are ticked/yellow for manual agree to start, (Please note you need to have a usb or hdd installed correctly for the epg as it is stored there)

TO CHANGE YOUR NET AREA CODE

If you have not supplied us with your area code then we will install the nearest one, if your area scan fails it may need to be changed (scan fail can also be down to no satellite cable installed if you have requested satellite) to change please follow this

GOOGLE VIRGIN AREA NET ID CODES and see which you are near

menu/setup/service searching/tuner configuration/tuner B and C if you have/network id--change to yours/exit

now

menu/setup/service searching/autobouquetsmaker/providers/virgin UK area--change to yours/exit

START SCAN....this may need to be repeated until you have the correct one

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

INSTALL WIFI DONGLE

Plug dongle in USB Slot in the front of your Zgemma (It’s hidden behind the
panel on the right hand side) - You do not need to install any drivers.

• Reboot your Zgemma - This is needed so the built in drivers can start up during boot
• Menu Button > Setup > System > Network > Device Setup
• Select WLAN connection
• Network Wizard
• List Available Networks
• Choose your Network
• Change ‘Use Interface’ to YES
• Change encryption to suit your wireless network (Usually ‘WPA or WPA2’)
• Enter your Wi-Fi password in the encryption key and press OK
• When prompted, select YES to activate the network and yes to disabling the
2
nd network interface (This will be your wired connection)
• When the network has been activated you will see a message of confirmation.
• Press OK
If you find that your wireless network is not working, ensure that you’ve entered the
correct password for your wireless network - If you get the password wrong, the
device will still connect. But it won’t be able to send and receive traffic wirelessly.

CHANGE YOUR TV REGION for satellite

To change the tv region on your box so you recieve the correct programs press menu/setup/service searching/autobouquetsmaker/providers scroll to sky uk then change the area to your correct one making sure it is on sd or custom NOT HD press green to save and then press start scan. When it is finished press exit to main screen, now press FAV and choose entertainment and your local area should be showing.

TO UPDATE WOOSHBUILD TO LATEST RELEASE

PLEASE MAKE SURE YOU HAVE A COPY OF ALL YOUR SUBSCRIPTIONS/GIFTS/ USERNAMES AND PASSWORDS, AS WELL AS YOUR AREA NET ID!!!!!!!! We are not responsible for this information neither if the update fails and puts the box into boot mode..

We can provide a recovery service for £30 returned providing you have all the info above

Ok so to start the update press the portal button on your remote or menu/plugins WB config

Now press backup/restore and run backup settings and then backup line (you can also view your line ect to make sure you have it-see other help on here)

Now press reflash/update Wooshbuild and follow the instructions from there.

when the update is complete you then go back to wb config and restore your line-and settings, all should be good
MAGBOXUK
VISION FOR THE FUTURE
WELCOME TO MAGBOXUK.COM
Home About Me My Family My Hobbies My Work My Pictures Contact
Welcome to MAGBOXUK

Here at MAGBOXUK.COM you can get all you need for your Zgemma linux Enigma 2 set top box, we supply pre programmed plug and play boxes for cable/satelite and internet streaming boxes (IPTV) both mag and zgemma, we also provide subscriptions for cable, satelite and iptv.

We have provided several sets of instructioins and tutorials to try resolve any issues or problems that may arise with your box, please note we only use wooshbuild on our boxes so most of the help here is designed around that.
MAGBOXUK
HELP AND TROUBLESHOOTING FOR YOUR ZGEMMA

We recommend using WOOSHBUILD and to download basebuild please click   HERE

To update the ALL4ONE version press menu/plugins/Add iptv (note the user/password) then make sure it says running latest version, if not press 5 to install, you may need to do this a couple of times, if says execution finished press ok then validate and return to main screen press fav to see bouquets


TO ADD AND REMOVE/UDATE PLUGINS

If you want to remove the ALL4ONE adder  plugin or xtreamtv-ipyv-mips-boxes plugin press menu/plugins/red button (to remove) extentions now scroll to the plugin and select (ok) to remove, then exit back to plugin browser

To add either plugin (this should update to the latest versions) press menu/plugins/green button (download plugins) extentions, scroll to plugin you require and select, when done go back to main menu and press menu/plugins and run the one you want. (mips boxes is the one required)

CREATE A BACKP OF YOUR IMAGE


IT IS STRONGLY ADVISED THAT YOU CREATE AN IMAGE/BACKUP OF YOUR BOX BEFORE CHANGING ANY SETTINGS......TO DO THIS PLEASE.....
Press blue on your remote, scroll right then down to complete backup/ok/red for HDD then wait until the process has finished, this may take 10 mins or so, please be patient

To Restore a Backup

Press blue button/flash online/local/yellow for local/yellow for devices/select your device/then full backup_zgemma then select the folder with the numbers  and press green for flash, it should now restore

How to install a new USB or HDD


Put your new device n a computer and format it in FAT32 if possible,
place it in the rear usb slot on your box
press the blue button on your remote, then scroll down to HARDDISK, then accross to initiallisation,ok and agree to the device being formatted (red button)
When this is done scroll left to mounts and then over to device manager, in you will see your divice, it needs to show MOUNT/MEDIA/HDD if not press green button to setup mounts and change the mount to show /media/HDD and press green to save, system will now ask to restart.
after the restart please press the red button then plugins and swap manager and green button to create/select your device/512mb/ok  and wait, when box shows media/hdd/swapfile press yellow for auto start then red to activate
finally exit out to main screen and press pause on your remote, live tv should pause, if so your new device is up and running. You now need to download EPG

How to install a new line, ccam.cfg, newcamd.list or CWS...... via remote

You can also Locate your line this way

Press menu/plugins/dream explorer/usr/keys, if your line starts C: or N:then it will go in the  ccam.cfg. if it starts with CWS then it will go in newcamd.list you will see a code in here, this is your line, highlight it and press ok, it can now be edited using your remote like an old phone keypad, after you have done place the curser at the end of your line and press ok then exit, it will ask if you are sure? if so press ok (please make sure you have a copy of the original line as mistakes in this process can lead to loss of all service)

How to install a new line via FTP or OPK via Filezilla

First you will need to download an ftp client pragram, i use filezilla, its free and easy enough to use
Once you have and are ready you need to find the ip address of your box, menu/information/network in here you will have an ip address, you need to put this into ftp (filezilla) click host user name is root and password is root, when you are connected to your box tou will see folders on the right hand of your screen, these are the folders in your box, press the + sign to drop the folders down, scroll down to USR and double click it, now scroll down to KEYS and click once, you will now see the ccam.cfg/mg_cfg and newcamd.list files underneath, these are ware you need to edit your line in by right click on the line type (c line = ccam.cfg n line= newcamd.list cws= newcand.list) and view/edit you can now edit or paste in your new line, exit out (you will more than likely need to restart your cams after this process)

How to restart the cams

Press the red button on your remote, select softcampanel, on select Cam1 scroll right untill you see Ccam 2,3,0 (if your line is a c line or n line, if your line starts CWS then scroll to mgcmd_1.38r....(we usually use CWS line if you have a vm line) when the correct cam is showing press green for start.

Note; if your box has already been running then the cam already showing will most likely to be the one you need to restart


EPG IMPORTER DOWNLOAD

To manually download the channel listings (EPG) press menu/plugins/epg importer blue button for sourses and make sure all boxes for sky uk/virgin uk rytec are all ticked if using sky or virgin for iptv make sure all QLUK boxes are ticked/yellow for manual agree to start, (Please note you need to have a usb or hdd installed correctly for the epg as it is stored there)

TO CHANGE YOUR NET AREA CODE

If you have not supplied us with your area code then we will install the nearest one, if your area scan fails it may need to be changed (scan fail can also be down to no satellite cable installed if you have requested satellite) to change please follow this

GOOGLE VIRGIN AREA NET ID CODES and see which you are near

menu/setup/service searching/tuner configuration/tuner B and C if you have/network id--change to yours/exit

now

menu/setup/service searching/autobouquetsmaker/providers/virgin UK area--change to yours/exit

START SCAN....this may need to be repeated until you have the correct one

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

INSTALL WIFI DONGLE

Plug dongle in USB Slot in the front of your Zgemma (It’s hidden behind the
panel on the right hand side) - You do not need to install any drivers.

• Reboot your Zgemma - This is needed so the built in drivers can start up during boot
• Menu Button > Setup > System > Network > Device Setup
• Select WLAN connection
• Network Wizard
• List Available Networks
• Choose your Network
• Change ‘Use Interface’ to YES
• Change encryption to suit your wireless network (Usually ‘WPA or WPA2’)
• Enter your Wi-Fi password in the encryption key and press OK
• When prompted, select YES to activate the network and yes to disabling the
2
nd network interface (This will be your wired connection)
• When the network has been activated you will see a message of confirmation.
• Press OK
If you find that your wireless network is not working, ensure that you’ve entered the
correct password for your wireless network - If you get the password wrong, the
device will still connect. But it won’t be able to send and receive traffic wirelessly.

CHANGE YOUR TV REGION for satellite

To change the tv region on your box so you recieve the correct programs press menu/setup/service searching/autobouquetsmaker/providers scroll to sky uk then change the area to your correct one making sure it is on sd or custom NOT HD press green to save and then press start scan. When it is finished press exit to main screen, now press FAV and choose entertainment and your local area should be showing.

TO UPDATE WOOSHBUILD TO LATEST RELEASE

PLEASE MAKE SURE YOU HAVE A COPY OF ALL YOUR SUBSCRIPTIONS/GIFTS/ USERNAMES AND PASSWORDS, AS WELL AS YOUR AREA NET ID!!!!!!!! We are not responsible for this information neither if the update fails and puts the box into boot mode..

We can provide a recovery service for £30 returned providing you have all the info above

Ok so to start the update press the portal button on your remote or menu/plugins WB config

Now press backup/restore and run backup settings and then backup line (you can also view your line ect to make sure you have it-see other help on here)

Now press reflash/update Wooshbuild and follow the instructions from there.

when the update is complete you then go back to wb config and restore your line-and settings, all should be good
HELP AND TROUBLESHOOTING FOR YOUR ZGEMMA

We recommend using WOOSHBUILD and to download basebuild please click   HERE

To update the ALL4ONE version press menu/plugins/Add iptv (note the user/password) then make sure it says running latest version, if not press 5 to install, you may need to do this a couple of times, if says execution finished press ok then validate and return to main screen press fav to see bouquets


TO ADD AND REMOVE/UDATE PLUGINS

If you want to remove the ALL4ONE  plugin or xtreamtv-ipyv-mips-boxes plugin press menu/plugins/red button (to remove) extentions now scroll to the plugin and select (ok) to remove, then exit back to plugin browser

To add either plugin (this should update to the latest versions) press menu/plugins/green button (download plugins) extentions, scroll to plugin you require and select, when done go back to main menu and press menu/plugins and run the one you want. (mips boxes is the one required)

CREATE A BACKP OF YOUR IMAGE


IT IS STRONGLY ADVISED THAT YOU CREATE AN IMAGE/BACKUP OF YOUR BOX BEFORE CHANGING ANY SETTINGS......TO DO THIS PLEASE.....
Press blue on your remote, scroll right then down to complete backup/ok/red for HDD then wait until the process has finished, this may take 10 mins or so, please be patient

To Restore a Backup

Press blue button/flash online/local/yellow for local/yellow for devices/select your device/then full backup_zgemma then select the folder with the numbers  and press green for flash, it should now restore

How to install a new USB or HDD


Put your new device n a computer and format it in FAT32 if possible,
place it in the rear usb slot on your box
press the blue button on your remote, then scroll down to HARDDISK, then accross to initiallisation,ok and agree to the device being formatted (red button)
When this is done scroll left to mounts and then over to device manager, in you will see your divice, it needs to show MOUNT/MEDIA/HDD if not press green button to setup mounts and change the mount to show /media/HDD and press green to save, system will now ask to restart.
after the restart please press the red button then plugins and swap manager and green button to create/select your device/512mb/ok  and wait, when box shows media/hdd/swapfile press yellow for auto start then red to activate
finally exit out to main screen and press pause on your remote, live tv should pause, if so your new device is up and running. You now need to download EPG

How to install a new line, ccam.cfg, newcamd.list or CWS...... via remote

You can also Locate your line this way

Press menu/plugins/dream explorer/usr/keys, if your line starts C: or N:then it will go in the  ccam.cfg. if it starts with CWS then it will go in newcamd.list you will see a code in here, this is your line, highlight it and press ok, it can now be edited using your remote like an old phone keypad, after you have done place the curser at the end of your line and press ok then exit, it will ask if you are sure? if so press ok (please make sure you have a copy of the original line as mistakes in this process can lead to loss of all service)

How to install a new line via FTP or OPK via Filezilla

First you will need to download an ftp client pragram, i use filezilla, its free and easy enough to use
Once you have and are ready you need to find the ip address of your box, menu/information/network in here you will have an ip address, you need to put this into ftp (filezilla) click host user name is root and password is root, when you are connected to your box tou will see folders on the right hand of your screen, these are the folders in your box, press the + sign to drop the folders down, scroll down to USR and double click it, now scroll down to KEYS and click once, you will now see the ccam.cfg/mg_cfg and newcamd.list files underneath, these are ware you need to edit your line in by right click on the line type (c line = ccam.cfg n line= newcamd.list cws= newcand.list) and view/edit you can now edit or paste in your new line, exit out (you will more than likely need to restart your cams after this process)

How to restart the cams

Press the red button on your remote, select softcampanel, on select Cam1 scroll right untill you see Ccam 2,3,0 (if your line is a c line or n line, if your line starts CWS then scroll to mgcmd_1.38r....(we usually use CWS line if you have a vm line) when the correct cam is showing press green for start.

Note; if your box has already been running then the cam already showing will most likely to be the one you need to restart


EPG IMPORTER DOWNLOAD

To manually download the channel listings (EPG) press menu/plugins/epg importer blue button for sourses and make sure all boxes for sky uk/virgin uk rytec are all ticked if using sky or virgin for iptv make sure all QLUK boxes are ticked/yellow for manual agree to start, (Please note you need to have a usb or hdd installed correctly for the epg as it is stored there)

TO CHANGE YOUR NET AREA CODE

If you have not supplied us with your area code then we will install the nearest one, if your area scan fails it may need to be changed (scan fail can also be down to no satellite cable installed if you have requested satellite) to change please follow this

GOOGLE VIRGIN AREA NET ID CODES and see which you are near

menu/setup/service searching/tuner configuration/tuner B and C if you have/network id--change to yours/exit

now

menu/setup/service searching/autobouquetsmaker/providers/virgin UK area--change to yours/exit

START SCAN....this may need to be repeated until you have the correct one

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

CABLE AREA NET ID.... required for all cable boxes to work

please follow this guide to get yours and send it to us with your name
if you cannot get it there are lists available online that we use but sometimes it is hit and mis so may slow your order down a little

To find your NETID on a Tivo box you press Home then 'Help & Settings' then 'Systems Info' then 'Diagnostics'
and the top line is your NETID

V+Box >> Press the home button on your VM remote control >>> Go to settings >>> Then technical stuff >>>
Your NETID is the first item on the list.

INSTALL WIFI DONGLE

Plug dongle in USB Slot in the front of your Zgemma (It’s hidden behind the
panel on the right hand side) - You do not need to install any drivers.

• Reboot your Zgemma - This is needed so the built in drivers can start up during boot
• Menu Button > Setup > System > Network > Device Setup
• Select WLAN connection
• Network Wizard
• List Available Networks
• Choose your Network
• Change ‘Use Interface’ to YES
• Change encryption to suit your wireless network (Usually ‘WPA or WPA2’)
• Enter your Wi-Fi password in the encryption key and press OK
• When prompted, select YES to activate the network and yes to disabling the
2
nd network interface (This will be your wired connection)
• When the network has been activated you will see a message of confirmation.
• Press OK
If you find that your wireless network is not working, ensure that you’ve entered the
correct password for your wireless network - If you get the password wrong, the
device will still connect. But it won’t be able to send and receive traffic wirelessly.

CHANGE YOUR TV REGION for satellite

To change the tv region on your box so you recieve the correct programs press menu/setup/service searching/autobouquetsmaker/providers scroll to sky uk then change the area to your correct one making sure it is on sd or custom NOT HD press green to save and then press start scan. When it is finished press exit to main screen, now press FAV and choose entertainment and your local area should be showing.

TO UPDATE WOOSHBUILD TO LATEST RELEASE

PLEASE MAKE SURE YOU HAVE A COPY OF ALL YOUR SUBSCRIPTIONS/GIFTS/ USERNAMES AND PASSWORDS, AS WELL AS YOUR AREA NET ID!!!!!!!! We are not responsible for this information neither if the update fails and puts the box into boot mode..

We can provide a recovery service for £30 returned providing you have all the info above

Ok so to start the update press the portal button on your remote or menu/plugins WB config

Now press backup/restore and run backup settings and then backup line (you can also view your line ect to make sure you have it-see other help on here)

Now press reflash/update Wooshbuild and follow the instructions from there.

when the update is complete you then go back to wb config and restore your line-and settings, all should be good